FreeBSD SRV1

Несколько моих серверов.

# uname -a

FreeBSD SRV1 7.4-RELEASE-p3 FreeBSD 7.4-RELEASE-p3 #0: Tue Sep 27 14:47:23 UTC 2011     root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  i386

#cat ./dmesg.boot
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.4-RELEASE-p3 #0: Tue Sep 27 14:47:23 UTC 2011
    root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) MP CPU 2.50GHz (2490.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf25  Family = f  Model = 2  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>
  Logical CPUs per core: 2
real memory  = 4026507264 (3839 MB)
avail memory = 3937681408 (3755 MB)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
MADT: Forcing active-low polarity and level trigger for SCI
acpi0: <COMPAQ P30> on motherboard
vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7ec0000-0xf7efffff,0xf7df0000-0xf7df3fff irq 30 at device 3.0 on pci1
bge0: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x001002> mem 0xf7ff0000-0xf7ffffff irq 31 at device 1.0 on pci2
brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0
bge1: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x001002> mem 0xf7fe0000-0xf7feffff irq 23 at device 2.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib4
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: does not respond
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2> on uhub0
umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2> on uhub0
acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
da1: <HUAWEI MMC Storage 2.31> Removable Direct Access SCSI-2 device
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP